Preview



The B4 is the first piece in our latest development of the “over 2020” wingsuit series.

  

The B4 is the first piece in our intermediate wingsuit category, it is faster, more powerful than its predecessor, the B3. During Covid, we wasted no time to integrate as much innovation, cutting edge technologies and development as possible into our latest generation B4 wingsuit.

 

What makes B4 better than its predecessor or other wingsuits?


It is made with a leading edge built with a completely new tech and approach for reduced drag at crucial areas of the wing, soft foam is standard, but performance foam can also be added to achieve even greater performance.


The NACA 4415 asymmetrical wing profile design was the basis for the arm and leg wings of the new generation of B4 wingsuits developed for dynamic flight. Its unique properties allow it to fly together even with high performance wingsuit fleets!


This profile is thinner, so the leading edges are flatter, less drag means higher speed. Up to 2 to 2.5 glide ratio can be easily maintained during the flight. Perfect choice for beginner and intermediate pilots from the entry category upwards, for fleets, back flying, dynamic carving and Wingsuit freefly. Due to the new carefully designed forearm segment, arm wing and gripper, it is easy to keep the suit in control and the pilot chute is easily accessible, so the easy opening feature at pull time is maintained along with the increased arm wing pressure.


Air inlets aerodynamic innovation: thanks to the unique air inlet system used by Intrudair the efficiency has improved, lower air resistance means less drag, and it provides high pressure to both the arm and leg wings.


The bootie part is reinforced with foam and our special sewing technique that you only find in Intrudair wingsuits. It keeps its shape without deforming, making the suit even more stable during the flight and transitions. Optionally, you can request sole reinforcement, so the bootie stays even stiffer at your shoes. It makes the suit tighter, faster, so the control on the legs is even more effective.


Main features:

  • Easy BOC access design
  • NACA 4415 wings profile
    • New smooth leading edge with soft foam + perf. foam
    • New air inlets, super-fast inflation
    • Standard large arm wing pockets + leg wings pocket
    • Non-slip BASE soles
    • Stiffened bootie
    • Adjustable internal wing pressure


     



    Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

    The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

    When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


    The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

    The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

    LEADING EDGE:

    Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



    PERFORMANCE FOAM:

    We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



    The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



    BOOTIE:

    The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



    At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



    ARTWORK:

    Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

    Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



    For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

    ZERO WASTE:

    We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

    Why is Zero waste more expensive?





    Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.


    The B4 is the first piece in our latest development of the “over 2020” wingsuit series.

      

    The B4 is the first piece in our intermediate wingsuit category, it is faster, more powerful than its predecessor, the B3. During Covid, we wasted no time to integrate as much innovation, cutting edge technologies and development as possible into our latest generation B4 wingsuit.

     

    What makes B4 better than its predecessor or other wingsuits?


    It is made with a leading edge built with a completely new tech and approach for reduced drag at crucial areas of the wing, soft foam is standard, but performance foam can also be added to achieve even greater performance.


    The NACA 4415 asymmetrical wing profile design was the basis for the arm and leg wings of the new generation of B4 wingsuits developed for dynamic flight. Its unique properties allow it to fly together even with high performance wingsuit fleets!


    This profile is thinner, so the leading edges are flatter, less drag means higher speed. Up to 2 to 2.5 glide ratio can be easily maintained during the flight. Perfect choice for beginner and intermediate pilots from the entry category upwards, for fleets, back flying, dynamic carving and Wingsuit freefly. Due to the new carefully designed forearm segment, arm wing and gripper, it is easy to keep the suit in control and the pilot chute is easily accessible, so the easy opening feature at pull time is maintained along with the increased arm wing pressure.


    Air inlets aerodynamic innovation: thanks to the unique air inlet system used by Intrudair the efficiency has improved, lower air resistance means less drag, and it provides high pressure to both the arm and leg wings.


    The bootie part is reinforced with foam and our special sewing technique that you only find in Intrudair wingsuits. It keeps its shape without deforming, making the suit even more stable during the flight and transitions. Optionally, you can request sole reinforcement, so the bootie stays even stiffer at your shoes. It makes the suit tighter, faster, so the control on the legs is even more effective.


    Main features:

    • Easy BOC access design
    • NACA 4415 wings profile
      • New smooth leading edge with soft foam + perf. foam
      • New air inlets, super-fast inflation
      • Standard large arm wing pockets + leg wings pocket
      • Non-slip BASE soles
      • Stiffened bootie
      • Adjustable internal wing pressure


       



      Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

      The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

      When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


      The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

      The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

      LEADING EDGE:

      Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



      PERFORMANCE FOAM:

      We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



      The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



      BOOTIE:

      The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



      At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



      ARTWORK:

      Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

      Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



      For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

      ZERO WASTE:

      We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

      Why is Zero waste more expensive?





      Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

      Videos

      How to Share With Just Friends

      How to share with just friends.

      Közzétette: Facebook – 2014. december 5., péntek

      Configurator / Designer


      CONFIGURATOR

      Pre-made Designs
      Only Printed


      EASY-TO-SELECT DESIGNS


      CONFIGURATOR

      Full custom-made
      Separately printable elements


      ALL ELEMENTS CAN BE COLORED & PRINTED


      Your browser:

      Barracuda 4 ®

      1/5 DESIGNER

      PRICE: 0 +VAT

      Designer

      Elements

      Stitching color

      Premade Designs
      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: p1

      Barracuda 4 ®

      Code: p2

      Barracuda 4 ®

      Code: p3

      Barracuda 4 ®

      Code: p4

      Barracuda 4 ®

      Code: p5

      Barracuda 4 ®

      Code: p6

      Barracuda 4 ®

      Code: p7

      Barracuda 4 ®

      Code: p8

      Barracuda 4 ®

      Code: p9

      Barracuda 4 ®

      Code: p10

      Barracuda 4 ®

      Code: p11

      Barracuda 4 ®

      Code: p12

      Barracuda 4 ®

      Code: p13

      Barracuda 4 ®

      Code: p14

      Barracuda 4 ®

      Code: p15

      Barracuda 4 ®

      Code: p16

      Barracuda 4 ®

      Code: p17

      Barracuda 4 ®

      Code: p18

      Barracuda 4 ®

      Code: p19

      Barracuda 4 ®

      Code: p20

      Barracuda 4 ®

      Code: p21

      Barracuda 4 ®

      Code: p22

      Barracuda 4 ®

      Code: p23

      Barracuda 4 ®

      Code: p24

      Barracuda 4 ®

      Code: p25

      Barracuda 4 ®

      Code: p26

      Barracuda 4 ®

      Code: p27

      Barracuda 4 ®

      Code: p28

      Barracuda 4 ®

      Code: p29

      Barracuda 4 ®

      Code: p30

      Barracuda 4 ®

      Code: p31

      Barracuda 4 ®

      Code: p32

      Barracuda 4 ®

      Code: p33

      Barracuda 4 ®

      Code: p34

      Barracuda 4 ®

      Code: p35

      Barracuda 4 ®

      Code: p36

      Barracuda 4 ®

      Code: p37

      Barracuda 4 ®

      Code: p38

      Barracuda 4 ®

      Code: p39

      Barracuda 4 ®

      Code: p40

      The suits will look very similar to the images below.
      The pattern of the prints continue across the cuts.

      Barracuda 4 ®

      Code: e1

      Barracuda 4 ®

      Code: e2

      Barracuda 4 ®

      Code: e3

      Barracuda 4 ®

      Code: e4

      Barracuda 4 ®

      Code: e5

      Barracuda 4 ®

      Code: e6

      Barracuda 4 ®

      Code: e7

      Barracuda 4 ®

      Code: e8

      Barracuda 4 ®

      Code: e9

      Barracuda 4 ®

      Code: e10

      Barracuda 4 ®

      Code: e11

      Barracuda 4 ®

      Code: e12

      Barracuda 4 ®

      Code: e13

      Barracuda 4 ®

      Code: e14

      Barracuda 4 ®

      Code: e15

      Barracuda 4 ®

      Code: e16

      Barracuda 4 ®

      Code: e17

      Barracuda 4 ®

      Code: e18

      Barracuda 4 ®

      Code: e19

      Barracuda 4 ®

      Code: e20

      Barracuda 4 ®

      Code: e21

      Barracuda 4 ®

      Code: e22

      Barracuda 4 ®

      Code: e23

      Barracuda 4 ®

      Code: e24

      Barracuda 4 ®

      Code: e25

      Barracuda 4 ®

      Code: e26

      Barracuda 4 ®

      Code: e27

      Barracuda 4 ®

      Code: e28

      Barracuda 4 ®

      Code: e29

      Barracuda 4 ®

      Code: e30

      Pre-Colored designs
      Barracuda 4 ®

      Code: color1

      Barracuda 4 ®

      Code: color1b

      Barracuda 4 ®

      Code: color2

      Barracuda 4 ®

      Code: color3

      Barracuda 4 ®

      Code: color4

      Barracuda 4 ®

      Code: color5

      Barracuda 4 ®

      Code: color6

      Barracuda 4 ®

      Code: color7

      Barracuda 4 ®

      Code: color8

      Barracuda 4 ®

      Code: color9

      Barracuda 4 ®

      Code: color10

      Barracuda 4 ®

      Code: color11

      Barracuda 4 ®

      Code: color12

      Barracuda 4 ®

      Code: color13

      Barracuda 4 ®

      Code: color14

      Barracuda 4 ®

      Code: color14b

      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: art1

      Barracuda 4 ®

      Code: art2

      Barracuda 4 ®

      Code: art3

      Barracuda 4 ®

      Code: art4

      Barracuda 4 ®

      Code: art5

      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: comic1

      Barracuda 4 ®

      Code: comic2

      Barracuda 4 ®

      Code: comic3

      Barracuda 4 ®

      Code: comic4

      Barracuda 4 ®

      Code: comic5

      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: geo1

      Barracuda 4 ®

      Code: geo2

      Barracuda 4 ®

      Code: geo3

      Barracuda 4 ®

      Code: geo4

      Barracuda 4 ®

      Code: geo5

      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: nc1

      Barracuda 4 ®

      Code: nc2

      Barracuda 4 ®

      Code: nc3

      Barracuda 4 ®

      Code: nc4

      Barracuda 4 ®

      Code: nc5

      These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
      The pattern of the prints won't continue across the cuts.

      Barracuda 4 ®

      Code: psy1

      Barracuda 4 ®

      Code: psy2

      Barracuda 4 ®

      Code: psy3

      Barracuda 4 ®

      Code: psy4

      Barracuda 4 ®

      Code: psy5

      Measurements Fields marked with * are required!
      Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
      Please, fill out each field.
      Please, enter at least 1 piece of one size.
      I have a project number:



      Click on the form field
      and begin measuring.

      Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

      Settings & Extras

      Settings

      Gender

      Choose you sex.

      Female Male

      Options: + EXTRA CHARGE

      Camera Pocket

      Zipper opening at the chest for chest mounted cameras.

      3D Performance Foam

      Better performance, more accurate leading edge/ better shape, tighter fit on the arms.

      Arm Cutaway System

      It is responsible for detaching the wings on wingsuits, the arm wings can be easily released by pulling a yellow cable handle (available for piranha models).

      Embroideries Fields marked with * are required!

      Name Embroidery

      +20€

      Extra Embroidery

      +40€

      Upload extra embroideries

      Billing Address Fields marked with * are required!

      I have a company

      Processing.. Please Wait!