Preview



Intrudair proudly presents the new member of our high performance wingsuit line, The RS Base edition. During the development, we focused on maximizing its performance, safety and controllability.

 

Thanks to the new air inlet design, the suit's pressurization is insanely rapid (2 sec), providing an extra fast start. The inner airflow system pushes the suit to shape - both arm and leg wing - almost instantly.

 

Featured properties:

  • Nearly instant usability after exit. The suit can be quite aggressive, but we also focused on safety and usability features.
  • During relaxed flight, it's quite easy to control, after stepping in line it's still agile and smoothly controllable. It can go back to relaxed flying in an easy transition.
  • Easy to pull, deployment is complication free.


Main Features:

  • New air inlets (unique in the market)- extreme fast inflating.
  • Leading edge with high performance material, with an additional medium soft performance foam.
  • The rib count has been doubled, providing extra smooth wing surface.
  • Foam filled booties, shape-preserving design for better stability.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.


Intrudair proudly presents the new member of our high performance wingsuit line, The RS Base edition. During the development, we focused on maximizing its performance, safety and controllability.

 

Thanks to the new air inlet design, the suit's pressurization is insanely rapid (2 sec), providing an extra fast start. The inner airflow system pushes the suit to shape - both arm and leg wing - almost instantly.

 

Featured properties:

  • Nearly instant usability after exit. The suit can be quite aggressive, but we also focused on safety and usability features.
  • During relaxed flight, it's quite easy to control, after stepping in line it's still agile and smoothly controllable. It can go back to relaxed flying in an easy transition.
  • Easy to pull, deployment is complication free.


Main Features:

  • New air inlets (unique in the market)- extreme fast inflating.
  • Leading edge with high performance material, with an additional medium soft performance foam.
  • The rib count has been doubled, providing extra smooth wing surface.
  • Foam filled booties, shape-preserving design for better stability.



Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.


The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.



PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.



The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.



BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.



At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.



ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.



For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?





Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.

Videos

Configurator / Designer


CONFIGURATOR

Pre-made Designs
Only Printed


EASY-TO-SELECT DESIGNS


CONFIGURATOR

Full custom-made
Separately printable elements


ALL ELEMENTS CAN BE COLORED & PRINTED


Your browser:

RS BASE ®

1/5 DESIGNER

PRICE: 0 +VAT

Designer

Elements

Stitching color

Premade Designs
These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: p1

RS BASE ®

Code: p2

RS BASE ®

Code: p3

RS BASE ®

Code: p4

RS BASE ®

Code: p5

RS BASE ®

Code: p6

RS BASE ®

Code: p7

RS BASE ®

Code: p8

RS BASE ®

Code: p9

RS BASE ®

Code: p10

RS BASE ®

Code: p11

RS BASE ®

Code: p12

RS BASE ®

Code: p13

RS BASE ®

Code: p14

RS BASE ®

Code: p15

RS BASE ®

Code: p16

RS BASE ®

Code: p17

RS BASE ®

Code: p18

RS BASE ®

Code: p19

RS BASE ®

Code: p20

RS BASE ®

Code: p21

RS BASE ®

Code: p22

RS BASE ®

Code: p23

RS BASE ®

Code: p24

RS BASE ®

Code: p25

RS BASE ®

Code: p26

RS BASE ®

Code: p27

RS BASE ®

Code: p28

RS BASE ®

Code: p29

RS BASE ®

Code: p30

RS BASE ®

Code: p31

RS BASE ®

Code: p32

RS BASE ®

Code: p33

RS BASE ®

Code: p34

RS BASE ®

Code: p35

RS BASE ®

Code: p36

RS BASE ®

Code: p37

RS BASE ®

Code: p38

RS BASE ®

Code: p39

RS BASE ®

Code: p40

The suits will look very similar to the images below.
The pattern of the prints continue across the cuts.

RS BASE ®

Code: e1

RS BASE ®

Code: e2

RS BASE ®

Code: e3

RS BASE ®

Code: e4

RS BASE ®

Code: e5

RS BASE ®

Code: e6

RS BASE ®

Code: e7

RS BASE ®

Code: e8

RS BASE ®

Code: e9

RS BASE ®

Code: e10

RS BASE ®

Code: e11

RS BASE ®

Code: e12

RS BASE ®

Code: e13

RS BASE ®

Code: e14

RS BASE ®

Code: e15

RS BASE ®

Code: e16

RS BASE ®

Code: e17

RS BASE ®

Code: e18

RS BASE ®

Code: e19

RS BASE ®

Code: e20

RS BASE ®

Code: e21

RS BASE ®

Code: e22

RS BASE ®

Code: e23

RS BASE ®

Code: e24

RS BASE ®

Code: e25

RS BASE ®

Code: e26

RS BASE ®

Code: e27

RS BASE ®

Code: e28

RS BASE ®

Code: e29

RS BASE ®

Code: e30

Pre-Colored designs
RS BASE ®

Code: color1

RS BASE ®

Code: color2

RS BASE ®

Code: color3

RS BASE ®

Code: color4

RS BASE ®

Code: color5

RS BASE ®

Code: color6

RS BASE ®

Code: color7

RS BASE ®

Code: color8

RS BASE ®

Code: color9

RS BASE ®

Code: color10

RS BASE ®

Code: color11

RS BASE ®

Code: color12

RS BASE ®

Code: color13

RS BASE ®

Code: color14

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: art1

RS BASE ®

Code: art1b

RS BASE ®

Code: art2

RS BASE ®

Code: art2b

RS BASE ®

Code: art3

RS BASE ®

Code: art3b

RS BASE ®

Code: art4

RS BASE ®

Code: art4b

RS BASE ®

Code: art5

RS BASE ®

Code: art5b

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: comic1

RS BASE ®

Code: comic1b

RS BASE ®

Code: comic2

RS BASE ®

Code: comic2b

RS BASE ®

Code: comic3

RS BASE ®

Code: comic3b

RS BASE ®

Code: comic4

RS BASE ®

Code: comic4b

RS BASE ®

Code: comic5

RS BASE ®

Code: comic5b

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: geo1

RS BASE ®

Code: geo2

RS BASE ®

Code: geo3

RS BASE ®

Code: geo4

RS BASE ®

Code: geo5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: nc1

RS BASE ®

Code: nc2

RS BASE ®

Code: nc3

RS BASE ®

Code: nc4

RS BASE ®

Code: nc5

These are repetitive seamless patterns, please note that the suit won't look exactly the same as the image.
The pattern of the prints won't continue across the cuts.

RS BASE ®

Code: psy1

RS BASE ®

Code: psy2

RS BASE ®

Code: psy3

RS BASE ®

Code: psy4

RS BASE ®

Code: psy5

Measurements Fields marked with * are required!
Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.
Please, fill out each field.
Please, enter at least 1 piece of one size.
I have a project number:



Click on the form field
and begin measuring.

Don"t measure yourself alone! Measure without shoes and put on the cloth you will wear underneath your suit.

Settings & Extras

Settings

Gender

Choose you sex.

Female Male

Options: + EXTRA CHARGE

Camera Pocket

Zipper opening at the chest for chest mounted cameras.

Backfly Inlets

3D Performance Foam

Better performance, more accurate leading edge/ better shape, tighter fit on the arms.

Embroideries Fields marked with * are required!

Name Embroidery

+20€

Extra Embroidery

+40€

Upload extra embroideries

Billing Address Fields marked with * are required!

I have a company

Processing.. Please Wait!