Intrudair® Summer Swoop Pants

Preview

About the Suit

The newest version of our summer swoop pants is out since we had a chance to little bit refresh our most popular pants! From now the tayloring is smoother, and the pants can follow the shape of your body more accurately.

The knees are cut with 3D lines, so that is why our summer swoop became more comfortable and even stronger.

Our summer swoop pants are tightly taylored with lots of elastic elements included around the thigh, the knees and the inner leg areas. Thanks to the strong protectors it will protect you on decent places (mostly on the knees, and tailbone)

The product's main fabric is 4-Ply Taslan, and Brunico WX elastic material.

As primeur you can already order it as long pants with cordura shin which is extremely abrasion resistant and slightly stretches backwards to make the pants stronger around the calf area.

In case you are a bit eccentric than you can make your order for printed pants with two supercool designs, or custom-made design as well. You can get it with nylon front as well.

Main features:

Taslan 4-Ply basic material
Cordura 1000 knees and bottom VIEW
Strong sewing
Tight fit tayloring
Comfortable / windproof elastic Brunico WX parts
Jeans pocket VIEW
Tight pocket VIEW

Extra Options:

Knee Protectors
Tailbone Protector
RDS Pocket VIEW
Long Version
Nylon Front (Free)
Printed design.

The knees are cut with 3D lines, so that is why our summer swoop became more comfortable and even stronger.

The product's main fabric is 4-Ply Taslan, and Brunico WX elastic material.

As primeur you can already order it as long pants with cordura shin which is extremely abrasion resistant and slightly stretches backwards to make the pants stronger around the calf area.

In case you are a bit eccentric than you can make your order for printed pants with two supercool designs, or custom-made design as well. You can get it with nylon front as well.

Main features:

Taslan 4-Ply basic material
Cordura 1000 knees and bottom VIEW
Strong sewing
Tight fit tayloring
Comfortable / windproof elastic Brunico WX parts
Jeans pocket VIEW
Tight pocket VIEW

Extra Options:

Knee Protectors
Tailbone Protector
RDS Pocket VIEW
Long Version
Nylon Front (Free)
Printed design.

Intrudair specialises in full custom-made tailoring. Whether it's a skydiving suit, a tunnel suit or a wingsuit, Intrudair always makes them fully custom made. We believe that decades of custom-made tailoring experience cannot be exchanged by a proportionately zooming software. It can help but cannot replace the working experience of skilled tailors who have a massive knowledge of different body shapes and their characteristics. Our tailors have gained experience in making over 10,000 custom made garments since we started our operations. This solid base helps to form the backbone of our wingsuit sizing.

The human body structure can vary greatly from one size to another, so our colleagues cut and sew the prototypes needed for the basic measurements very carefully, this is ESSENTIAL before we launch a product. It may slow down the release of the product a little but it guarantees that we work with accurate fitting patterns.

When you receive an Intrudair wingsuit, you can be sure that our experts have checked your measurements and tailored your wingsuit to your size according to the closest fitting pattern to you. We cannot always be 100% accurate but we guarantee that when you order a custom Intrudair wingsuit, it will be made specially for you.

The shape of the wingsuits is becoming more and more streamlined in each category- see the experiments of the early 2000s (since when we talk about modern wingsuits) or the evolution of the shape of the parachute canopy.

The secret is in the details, the different profile heights and shapes determine the main flight characteristics of the suit. The most typical glide ratio and speed in each category set the direction of development.

LEADING EDGE:

Intrudair uses a special, three-layered, slightly elastic, laminated material (developed just for this purpose) for the leading edge. It keeps its shape and adapts to the position of the arm, depending on whether you use soft foam or special performance foam.

PERFORMANCE FOAM:

We use a profile-cut foam in the new Intrudair wingsuit that does not restrict free movement but holds the outside of the leading edge firmly in place while taking up and levelling the shape of your arm inside. It is easy to replace and does not break.

The amount of air entering the air intakes determines the pressure in the wings. Although this is adjustable, Intrudair puts a lot of effort into experimenting with different sizes of air intakes.

BOOTIE:

The bootie is responsible for stability. Intrudair is the only company to use a bootie-fix system developed to fix the bootie in place. This system prevents the bootie from deforming during flight. The fixed shape provides extra stability and easy manoeuvrability, and the width of the stride can be adjusted when the bootie is opened.

At the moment we believe that the well-tuned wing profile, pressure and stabilisation give the main flight parameters of our suits, which make Intrudair suits more stable and easier to fly than their competitors.

ARTWORK:

Intrudair puts a special effort into the styling of the suits, for extra custom-designed suits we offer a graphic service that crosses the boundaries of artistic suit design!

Our graphic designers can create patterns on your suit that are almost unimaginable. They match and align the graphics to the over 50 printed parts of the suit. This work is very time consuming and requires full manual work, no automatic program or pattern zooming software can do this.

For normal prints the fabric is printed in rolls and cut out, for super custom prints a "blown" image is edited onto the desired design and then proofed several times before cutting. After that, thanks to the handwork of the seamstresses, almost all the patterns fit and so there are some patterns where you will only find the air vents after a long search. These all add to the length of the process but in the end you will have a truly unique, personalised and custom-designed wingsuit.

ZERO WASTE:

We pay attention to environmentally conscious manufacturing. The leftover printed materials are used in the Zero waste project so the plastics don't end up in the trash but start a new life in an extra cool customized outfit.

Why is Zero waste more expensive?

Sure, the materials are leftovers but cutting the dress nearly becomes a manual operation. Each printed part is put one by one under the laser cutter in an effort to use up all the scraps, so the extra cost of printing is invested in manual labour. We use the scraps and save nature with extra working hours.